Helpful Infrared Camera Hints
Sunday, December 7th, 2008
Infrared Cameras have a variety of uses and applications. Here at Texso Instruments, we have a wide selection of thermal imaging cameras for beginners to seasoned professionals. We want to offer a few tips and tricks on getting the most out of your camera or thermometer.Another helpful tip is to know the maximum distance you are working with. If the camera is too far from the target, the target spot will be too small and the accuracy of the resulting temperature measurements will be compromised because the camera will average the temperatures of the target spot and the environment. The closer you are to the item being measured results in the most accurate temperature; however, remember to never get closer than the minimum focal distance of the camera optics. An important point that might seem simple is to hold the camera extremely steady by using a brace for the arm, resting it on a surface or using a tripod. Slight movements will cause blurring and lessen the sharpness of the image.
Lens cleaning and camera maintenance are also extremely important factors. The body of the camera, cables and accessories can be cleaned simply by wiping with a soft cloth. If a stain exists, moisten the cloth with a mild detergent, followed by a dry soft cloth. Never use chemical products on the camera or any cables and accessories for it will lead to deterioration. When cleaning the lenses, first blow off loose dirt with a can of compressed air, and gently clean the lenses surface with a cotton ball, soft cloth, or kleenex. Keep in mind excessive cleaning can break down the coating.
Our selection of infrared cameras are from the best manufacturers who manufacture extremely high quality equipment. We are confident you will be extremely satisfied with your selection. Use these helpful hints to get the most out of your camera.
