Fluke 116 HVAC Digital True RMS Multimeter

Add Items to Cart Qty:

Quick Overview

Fluke 116 True-RMS DMM has the functions HVAC/R installers and contractors need to troubleshoot HVAC equipment and flame sensor problems quickly. It features a built-in thermometer.

Product Description

Measure superheat and sub cooling: Measure key temperatures and pressures. Use the Fluke 116 with a Fluke velcro pipeclamp (included in kit) and the PV350 (optional) pressure module to determine superheat and sub cooling values. Detect problems like a clogged filter drier, undercharge, overcharge, faulty metering device or improper airflow, liquid line restriction or insufficient water flow.
Troubleshoot the defrost control on a heat pump: Check the temperature of the air coil or confirm when the defrost cycle starts and ends
Take temperature surveys: Test out compressor heads, oil sumps, evaporator coils and suction lines, plus discharge lines, condenser coils and the liquid line
Microamps measurement for testing flame sensors: When a furnace flame will not stay lit, use the Fluke 116 microamps measurement to troubleshoot the flame rod circuit.
LoZ reduces chance of false readings due to ghost voltage.

Features:

Large white LED backlight for excellent visibility in poorly lit areas
Min/Max/ Average to record signal fluctuations
Compact ergonomic design for one-handed operation
CAT III 600 V safety rated

General Specifications:

Maximum voltage between any terminal and earth ground: 600 V
Surge protection 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
Fuse for A input 11 A, 1000 V FAST Fuse (Fluke PN 803293)
Display Digital: 6,000 counts, updates 4/sec
Bar graph 33 segments, updates 32/sec
Operating temperature -10 °C to + 50 °C
Storage temperature -40 °C to + 60 °C
Battery 9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery life 400 hours typical, N10140 without backlight

included:

TL75 Test Leads
Holster
User?s Manual
9 V battery (installed)

Tags fluke 116, 116jf, fluke 116 dmm, fluke digital multimeter 116, jf116, fluke hvac 116 dmm

Additional Information

Specifications

Accuracy Specifications
DC millivolts
Range:	600.0 mV
Resolution:	0.1 mV
Accuracy:	± ([% of reading] + [counts]): 2.0% + 3
DC volts
Range/Resolution:	6.000 V / 0.001 V
Range/Resolution:	60.00 V / 0.01 V
Range/Resolution:	600.00 V / 0.1 V
Auto volts
Range:	600.0 V
Resolution:	0.1 V
Accuracy:	2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts1 true-rms
Range:	600.0 mV
Resolution:	0.1 mV
Accuracy:	1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms
Range/Resolution:	6.000 V / 0.001 V
Range/Resolution:	60.00 V / 0.01 V
Range/Resolution:	600.0 V / 0.1 V
Accuracy:	1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
Continuity
Range:	600 Ω
Resolution:	1 Ω
Accuracy:	Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms
Range/Resolution:	600.0 Ω / 0.1 Ω
Range/Resolution:	6.000 kΩ / 0.001 kΩ
Range/Resolution:	60.00 kΩ / 0.01 kΩ
Range/Resolution:	600.0 kΩ / 0.1 kΩ
Range/Resolution:	6.000 MΩ / 0.001 MΩ
Accuracy:	0.9 % + 1
Range/Resolution:	40.00 MΩ / 0.01 MΩ
Accuracy:	1.5 % + 2
Diode Test
Range/Resolution:	2.000 V / 0.001 V
Accuracy:	0.9% + 2
Capacitance
Range/Resolution:	1000 nF / 1 nF
Range/Resolution:	10.00 μF / 0.01 μF
Range/Resolution:	100.0 μF / 0.1 μF
Range/Resolution:	9999 μF / 1 μF
Range/Resolution:	100 μF to 1000 μF
Accuracy:	1.9% + 2
Range/Resolution:	> 1000 μF
Accuracy:	5% + 20%
LoZ capacitance
Range:	1 nF to 500 μF
Accuracy:	10% + 2 typical
Temperature2 (Type-K thermocouple)
Range/Resolution:	-40 °C to 400 °C / 0.1 °C
Accuracy:	1% + 102
Range/Resolution:	-40 °F to 752 °C / 0.2 °F
Accuracy:	1% + 182
AC μamps true-rms (45 Hz to 500 Hz)
Range/Resolution:	600.0 μA / 0.1 μA
Accuracy:	1.0% + 2
DC μamps
Range/Resolution:	600.0 μA / 0.1 μA
Accuracy:	1.0% + 2
Hz (V or A input)2
Range/Resolution:	99.99 Hz / 0.01 Hz
Range/Resolution:	999.99 Hz / 0.1 Hz
Range/Resolution:	9.999 Hz / 0.001 Hz
Range/Resolution:	50.00 Hz / 0.01 Hz
Accuracy:	0.1% + 2